Opcom Add Key
Autel IM608 Programming Chevrolet Cruze 2013 All keys lost. Possible to add key without any working key.
Jun 13, 2017 Opcom v1.59 can program keys also, but you need use Carprog v8.21 or CarProg 10.05 to read pin /security codes from engine ECU. The security code has four digits, and it only contain numbers, from 0 to 9. To help us serve you better, please provide some information to us. If you require Technical Support, please Click Here. Introduce yourself. Automates many common tasks, such as GOODNIGHT, payroll posting, card processing, and ACH processing. Provides automatic notification that can be triggered by many different events, such as changes in the environment or a job starting, stopping, failing, or being delayed.
Main steps:
1. Read vehicle IMMO data
2.Password reading to get PINCODE
3. Add key
Add key-Control unit-Immobilizer(CAN)-Add Key. Then please close all doors and switch the ignition on. Please input 4-Digit Pin Code, press “OK” to continue. Pls switch the iginition off and remove the key, press OK. 4.Test Remote locking /unlocking key function. Autel IM608 is successfully tested working fine with Chevrolet Cruze. Aug 10, 2016 OPCOM v1.39 firmware can read security codes for key programming and immo August 10, 2016 sales Car diagnostic tool 0 It’s verified that only OPCOM OP-COM firmware version 1.39 running with VAUX-COM 2009 software can read security codes for key programming, all tested by users.
4.Test Remote locking /unlocking key function.
Test Remote locking /unlocking key function.
Tool use: Autel MaxiIM IM608
Car:GM Chevrolet Cruze 2013 USA
How to use Autel IM608 to add a new key for Chevrolet Cruze 2013:
1. Read vehicle IMMO data
Plug IM608 into the OBD2 port of the car
->IMMO->GM->Automatic selection
Enter the VIN number or press “Read” to obtain the VIN.
Confirm vehicle profile ,then press “OK”
Choose the key type” Blade Key”->”1.4T”
2.Password reading to get PINCODE
Hot function->Read immobilizer password->Read immobilizer password(CAN)->Password Reading
Note:
1.This feature recommends using USB to connection VCI,otherwise the feature may fail
2.this feature need a network connection in parts of vehicle ,pls ensure the network connection is
normal
Switch the ignition on, press “OK” to continue
System data initializing
please wait..
establishing vehicle communication…
Reading PIN, wait pls …
Pincode read successfully!
3. Add key
->Control unit->Immobilizer(CAN)->Add Key
Then please close all doors and switch the ignition on.
Please input 4-Digit Pin Code, press “OK” to continue
Pls switch the iginition off and remove the key, press OK
4.Test Remote locking /unlocking key function.
Done! Autel IM608 is successfully tested working fine with Chevrolet Cruze 2013 key programming